Skutt 1027-3 · Austin, TX
By the shelf or by the full kiln
$20
Per shelf
$25
Per shelf
$60
Full kiln
$80
Full kiln
Shelf dimensions: 20" wide x 6" tall · Group firings happen about once every 1-2 months
All pieces must be bone dry — no damp or leather-hard work
Remove any sharp edges or burrs from bottoms
Clearly label your pieces (name + firing type)
No glaze on the bottom of pieces — wipe at least ¼" from the base
Group firing pieces should use only tested, cone-appropriate glazes
Bisque firing to cone 06
Glaze firing to cone 6
Clay bodies must be rated for the appropriate cone temperature
No low-fire glazes in cone 6 firings
No pieces taller than 27" or wider than 20" (kiln interior limits)
All work is fired at your own risk. Katie Ann Clay is not responsible for cracking, warping, exploding, or other damage that may occur during firing.
Pieces that are not fully dry may crack or explode in the kiln and can damage other work in the load. Wet or damp pieces will be set aside and not fired.
In group firings, glaze interactions between pieces can occur. Unexpected drips, fumes, or flashing from neighboring pieces are an inherent part of shared kiln loads.
Glazes that run, bubble, or flux excessively can damage kiln shelves. If shelf damage occurs due to improperly tested glazes, you may be responsible for replacement cost.
By submitting work for firing, you acknowledge and accept these risks.
Venmo @Katie-Lehn
Include the date of firing and firing type
Example: 2/25/26 cone 6 group fire
